Huron areas only ferrous and non-ferrous scrap recycling business

Barti Metal Processing

Contact

(605) 352-2072

"

Services

Services

Roll-off Containers and
Lugger Boxes:

Barti Metal provides many local companies roll-off containers and lugger boxes for scrap metal and non-ferrous collection. Most containers are provided for on-site collection. Sizes range from 10’ – 24’ in length.

Off-Site Pick-up:

Barti Metal also provides off-site scrap clean-up for the surrounding area including farm yards and vehicle retrieval using a variety of mobile equipment.

Equipment and Facilities:

Barti Metal also has a wide variety of equipment necessary for the loading, unloading and processing of materials. We have 6 material handlers, 2 shears, a mobile logger/baler, 2 pay-loaders and a variety of trucks in order to best serve the needs of our customers. We also have an indoor baler for all non-ferrous goods such as aluminum cans, miscellaneous aluminum, radiators and assorted copper.

Hours

 

 

Office Hours:

Monday – Friday 8:00 am – 5:00 pm

Saturday 8:00 am – 12:00 am

 

Scrap Receiving Hours:

Monday – Friday 8:00 am – 4:45 pm

Saturday 8:00 am – 11:45 am

 

Scrap Specifications

Prepared Scrap Iron: Steel Cut to pieces from 18”x18”X 36” or smaller.  1/8” or thicker.  Must be all steel; no tin, cast or electric motors.  ____/ton

UnPrepared/Mixed Scrap Iron: Iron pieces larger than18”x 18”x 36”. Whole machinery.(Plows, diggers etc.)  May have cast, and electric motors, small amounts of tin/wire. No tires, ballast, capacitors or sealed containers are allowed ____/ton

Cars/Combines Drained: Rubber tires must be off of the vehicle and spare tires out of the car, all fluids must be drained including radiators transmission, rear end and engine oil.   The gas tanks must be off of the vehicle drained and holes punched in them.  Batteries must be taken out of the vehicle. Under no circumstances will cars or combines be accepted without the refrigerant being evacuated.  All cars must have titles/VIN #  _____/ton

Tin: Iron that is less than 1/8” thick, culverts and open ended barrels etc. _____/ton                    

#1 Cast Iron: Clean machinery, cast, brake drums, motor blocks etc.  ____/ton

#2 Cast Iron: Sewer pipe, water hydrants, tubs and sinks.  _____/ton

Aluminum: Aluminum free of steel, plastic, dirt etc. ______/lb

Aluminum Breakage: Aluminum with steel, plastic or other non aluminum ______/lb

#1Copper: New copper pipe, clean copper wire.  No paint, no solder roughly 12 gauge or thicker______/lb

#2Copper: Any light wire, any copper with solder, paint or excess corrosion______/lb

Insulated Copper Wire: Copper wire with insulation _____/lb

Brass: Brass with no other metals attached._____/lb

Radiators: Brass and copper radiators with no other metals attached or inserted.  _____/lb

Stainless Steel: Stainless Steel, No steel.  ______/lb                                                                                      

Beverage Cans: Aluminum Cans only.  Keep cat food cans separate from aluminum cans.  Tin cans are not accepted. Cans must be dry.  Wet cans will be subject to dockage _____/lb

*This list serves as merely a guideline; for more information, call (605)352-2072*

Address

1969 Old Highway 14
Huron, SD 57350

Email

Owner: Barry Mack – barrym@bartimetal.com

Phone

(605) 352-2072

Fax

(605) 352-0813